WipperSnapper 1.0.0-beta.101

WipperSnapper 1.0.0-beta.101

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Bugs 🐛

• Fix LEDC PWM DutyCycle by @brentru in #752

Driver Updates

• Update PM2.5 begin_UART call for PM1006 (PM25AQI v2.0.0) by @tyeth in #746

Full Changelog: 1.0.0-beta.100...1.0.0-beta.101

WipperSnapper Offline 1.0.0-offline-beta.3

What's Changed

🆕 Added Components 🆕

• SGP30, HTU31D, HDC302x, LPS28DFW, VCNL4200, INA260, and SEN66! via #739

Bug Fixes 🐛

• Offline mode PR fixes for SD pin and USB reattach @tyeth in #748
• [Offline Mode] Fix Config file deletion, RTC initialization failure by @brentru in #743
• [Offline Mode] Remove requirement for secrets.json by @brentru in #744

Usage and Installation

Usage and installation information can be found on the Adafruit Learning System Guide

Full Changelog: 1.0.0-offline-beta.2...1.0.0-offline-beta.3

WipperSnapper Offline 1.0.0-offline-beta.2

What's Changed

• New Feature ✨ - config.json file is now built automatically! via #728
• New Feature 💾 - Automatic initialization for the microSD card via #728
• New Feature 🔌 - Automatic Detection, Configuration and Initialization for I2C Components via #728

Usage and Installation

Usage and installation information can be found on the Adafruit Learning System Guide

Changelog

Full Changelog: 1.0.0-offline-beta.1...1.0.0-offline-beta.2

WipperSnapper 1.0.0-beta.100

WipperSnapper 1.0.0-beta.100

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

New Component 🆕🆕🆕 Texas Instruments INA260 🛒 added

This amazing sensor is a great successor to the INA219 series, due to its integrated precision shunt resistor it can be used to measure as much as +36V at up to 15A Continuous on either the high or low side, grab your INA260 now!

• Add INA260 by @tyeth in #718

Full Changelog: 1.0.0-beta.99...1.0.0-beta.100

WipperSnapper 1.0.0-beta.99

WipperSnapper 1.0.0-beta.99

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Bugs 🐛

• SCD-pointers-v98-fix by @tyeth in #714

Tooling

• Revert "use brentru SPIFLash fork" by @tyeth in #715

Full Changelog: 1.0.0-beta.98...1.0.0-beta.99

Wippersnapper 1.0.0-beta.98 - I2C speed changed from 50kHz to 100kHz

WipperSnapper 1.0.0-beta.98

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

New Component 🆕🆕🆕 ST Microelectronics LPS28DFW added

The new breakout for the extreme range pressure sensor from ST has been added, grab your LPS28 now!

• Add LPS28DFW by @tyeth in #695

What's Changed

Fixes for scanning I2C on the ESP32-S2 based boards, along with fixes for the SCD30/SCD4x and other sensors.
*** I2C speed changed from 50kHz to 100kHz on ESP boards - Please report any issues ***

• Update WipperSnapper_I2C_Driver_SCD4X.h - renamed include by @tyeth in #689
• Fix SDFat Conflict for Pico by @brentru in #706

Bugs 🐛

• fix: timeout datatype in haltError by @tyeth in #690
• Update I2C initialisation of locals by @tyeth in #694
• Scd30 scd4x others poll min 1sec by @tyeth in #709
• Fix Issues: Pixel and Status Pixel by @brentru in #708
• Revert SDFat Forked Dependency for Pico by @brentru in #711
• Fix: I2C Scan on ESP32-S2 by @brentru in #712

Tooling

• ESP32 BSP to 3.1.3 (except funhouse/lvgl builds)
• RP2 BSP to 4.4.4

Full Changelog: 1.0.0-beta.97...1.0.0-beta.98

🧪 WipperSnapper Offline - 1.0.0-offline-beta.1

This is the first release of the "WipperSnapper offline" firmware.

Important - This firmware is not able to connect to Adafruit IO (yet). It logs data locally to USB Serial or SD Card. If you'd like to use your development board with Adafruit IO, please use the latest WipperSnapper release.

Usage and Installation

Usage and installation information can be found on the Adafruit Learning System Guide

WipperSnapper 1.0.0-beta.97 - Funhouse fix and Mini Sparkles

WipperSnapper 1.0.0-beta.97

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Bugs 🐛

The FunHouse board experienced a boot loop situation in release 96, so this is a quick hotfix release to resolve that issue.

Features 🛜

Just in case you missed it, we've added support for specifying more than one WiFi Network in your secrets file.

See this Adafruit-Playground note for details. (Please help us by reporting issues, post in the forum or use the Feedback link)

🆕🆕🆕 New Board 🌈🦄 Sparkle Motion Mini 🆕🆕🆕

If you're temporarily waiting for your truckload of LEDs to arrive before putting W.LED on your Sparkle Motion Mini, then why not stick some sensors you've got lying around on the internet and use them to control the onboard NeoPixel for kicks!
Pickup your Adafruit Mini Sparkle Motion here 🛒

⚠️Warning⚠️ macOS users: if you have issues with using the web installer / esptool, you probably need to go and install the CH34X driver and then double check you've enabled it in driver extensions if OSX 13 or above. See here: https://learn.adafruit.com/how-to-install-drivers-for-wch-usb-to-serial-chips-ch9102f-ch9102/mac-driver-installation

Tooling

• Drop Funhouse down to ESP32 BSP wipper-3.0.7-idf-5.1.4 in adafruit/ci-arduino@69b0743

Full Changelog: 1.0.0-beta.96...1.0.0-beta.97

WipperSnapper 1.0.0-beta.96

WipperSnapper 1.0.0-beta.96

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Features

Just in case you missed it, we've added support for specifying more than one WiFi Network in your secrets file.

See this Adafruit-Playground note for details. (Please help us by reporting issues, post in the forum or use the Feedback link)

🆕🆕🆕 New Board 🌈🦄 Sparkle Motion Mini 🆕🆕🆕

If you're temporarily waiting for your truckload of LEDs to arrive before putting W.LED on your Sparkle Motion Mini, then why not stick some sensors you've got lying around on the internet and use them to control the onboard NeoPixel for kicks!
Pickup your Adafruit Mini Sparkle Motion here 🛒

• Add Sparkle motion mini by @tyeth in #685

Warning macOS users: There are reports of issues using esptool, try to find a windows computer until the esptool is fixed or keep retrying using bootloader mode (hold boot button while resetting/replugging device) combined with the --no-stub option for esptool.
e.g.esptool.py --no-stub chip_id

Tooling

• Swap staging root certificate to ISRG Root X1 by @tyeth in #682

Full Changelog: 1.0.0-beta.95...1.0.0-beta.96

WipperSnapper 1.0.0-beta.95

WipperSnapper 1.0.0-beta.95

Installing WipperSnapper

Follow this learning system guide to learn how to install WipperSnapper on your board.

Upgrade a device running WipperSnapper

Locate the device you want to upgrade on io.adafruit.com/devices. Then, click "Update".

What's Changed

Features

Just in case you missed it, we've added support for specifying more than one WiFi Network in your secrets file.

See this Adafruit-Playground note for details.

New Components 🆕🆕🆕

Use a 3volt supply and a JST-GHR 6pin cable to connect to the new Sensirion SEN6x Family of Air Quality Sensors (Supports SEN60, SEN63C, SEN65, SEN66, SEN68).
Pickup an evaluation kit for the SEN66 from Digikey (or preorder the raw sensor units).

• add sen6x, derived from sen5x driver by @MartinEbnerSensirion in #675

Fixes

• Fixed SEN66 CO2 overflow by @tyeth in #681

Tooling

• Delete unused boards by @tyeth in #680

New Contributors

• @MartinEbnerSensirion made their first contribution in #675

Full Changelog: 1.0.0-beta.94...1.0.0-beta.95