This project allows you to embed any file without distorting the image.
The following image contains a text file: The file being written(testImage/Hello.txt)
Records and reads 0 and 1 according to the even and odd RGB numbers of the image. (LSB conversion)
This allows you to embed and read any file into an image.
You can also record the filename along with the file's binary, so you can automatically record the filename and extension when reading it.
*Note: If there is a file with the same name as the output file, it will be overwritten. Please be careful. Improved
A GUI environment has been added.
This has improved the UX.
If you are using the old CUI environment, please refer to README.md in the "old" file. The license is the same, but the content may be outdated.
Please rest assured that the output files are compatible.
*This is an explanation for the new GUI. If you are using the old CUI environment, please refer to the README.md file in the "old" file.
Download the latest release.
Run "Image_information_embedder_GUI.exe" included in the release in zip file.
When it starts, enter the following
Select decode mode (read) or decode mode (write).
After setting the two buttons, press the "Decision" button to confirm.
Four input tabs will appear.
From the top, they are
1 Enter the file name to embed (file can be referenced)
2 Enter the file name when output
3 Enter the image file name to write (file can be referenced)
4 Enter the image file name to output
When you have entered everything correctly, press the "Decision" button to confirm.
When "Writing successful" is displayed under that button, it is complete.
One input tab will appear.
To do this, select the name of the image file to read. (File can be referenced)
When you have entered everything correctly, press the "Decision" button to confirm.
When "Saving successful" appears below the button, the process is complete.
If this happens, simply press the "Decision" button again to confirm if you want to overwrite the file, or if you want to change the file name, change or enter the
output name and then press the "Decision" button to confirm.
Download with the green button in the upper right.
Python must be installed
This project depends on the Python module (Pillow).
To install, run
pip install Pillow.
Execute Image_information_embedder_GUI.py.
The general method is to go to the downloaded directory and run
python Image_information_embedder_GUI.pyThis explanation and the program comments are machine translated from Japanese.
There may be undesirable or incorrect expressions.
If so, please report it with "lssues".
This project is licensed under the MIT License. See the LICENSE file for more details.